- Cancer Biology & Biomarkers
- Chromatography & Mass Spectrometry
- Contract Research, Clinical Trials and Outsourcing
- Drug Discovery
- Drug Targets
- Flow Cytometry
- Informatics & Lab Automation
- Ingredients, Excipients and Dosages
- Microbiology & RMMs
- NIR, PAT & QbD
- Raman Spectroscopy
- Screening, Assays & High-Content Analysis
- Thermal Processing
Chemical Plant Equipment
Tel: +44 (0) 1787 242193
Chemical Plant Equipment sells high quality 2nd hand pharmaceutical manufacturing equipment.
Our Top Items include:
Double Cone Dryer 4700Ltr
Pfaudler Balfour Blue Glass Lined 4700 Litre Jacketed Double Cone Drying System. Pfaudler Balfour 316L Stainless Steel Blue Glass Lined 4700 Litre Jacketed Lagged and painted Glass Fibre Clad Double Cone Blender, has a nominal working capacity of 4700 Litres, and a full capacity of 7250 Litres, for the "Primary" blending of the raw power mixture. The Double Cone is 2.6m in Diameter, with a central straight side of 0.9m, is fitted at one end with a 600mm diameter hinged and clamped Manway, and at the other end with a fitted 300mm Diameter Actuated Butterfly Valve, which is used for the filling from above by means of the overhead First Floor Big Bag Filling system, and for discharging below via the sealed Big Bag Filling system. The Double Cone Blender is driven at speed of 25 RPM, by means of the EX rated 415v 3 Phase 50Hz 22Kw 1460 RPM direct coupled motor and gearbox drive system. The Double Cone Blender measures 5.2 x 3.7 x 6.6 high with the cone raised vertically, and weighs approx 15 Tonnes, and is controlled by a front mounted control panel measuring 600 x 360 x 650mm high. Item 3, once the Primary Blending operation is complete the Double Cone Blender discharges via it's 300mm diameter actuated Butterfly valve into the 2001 Hosakawa Big Bag Loading System. Item 2, The Big Bag being filled is situated inside a tared Plastic Tote Bin which is in turn sitting on a Stainless Steel guided floor mounted Mettler Toledo ID3sTx Weighscale, which measures internally 1.5m wide x 1.5m long x 60mm high. The Big Bag filling operation is all controlled by the Hosakawa Stainless Steel Control Panel, measures 750 x 470 x 750mm high, and is mounted on the rear Operation Access platform, which is linked to the front mounted 2001 Mettler Toledo ID3sTx Weighscales Control Panel, S/No 2463748, which measure 260 x 350 x 180mm high. The total size of the Big Bag Filling/ Weighing System = 1.7m wide x 3.7m long x 2.5m high, and weighs approx 800Kgs. item 4, is the ceiling mounted Big Bag Hoist, which lifts the Big Bags of powder over the upright Double Cone Blender trolley mounted feed 300mm diameter aspirated shute system, which has previously been pneumatically lowered over the opened inlet valve of the Blender. The Operations control these operations from the surrounding overhead white painted Mild Steel Operator Access Platforms. This Big Bag Loading System measures 5.2m x 4.5m x 3.35m high, and weighs approx 4 Tonnes. Item 5, overhead 3.6m high ceiling mounted Big Bag loading system, consists of a 6m long x 1.5 SWL Overhead lifting beam, fitted with an electrically driven Italkrana hoist, fitted with a 800Kg rated Big Bag Stainless Steel Lifting Frame. Item 6, Stainless Steel Big Bag Transfer Trolley, mounted on 4 lockable swivel castors, measuring 1.1 x 1.1 x 1.4m high, and weighing 300Kgs. Item 7, Big Bag floor mounted QC weighment checking floors scales, which consists of a Stainless Steel ramped floor mounted Mettler Toledo ID7sx Weighscale, which measures internally 1.5m wide x 1.25m long x 100mm high, which is linked to wall mounted 2004 Mettler Toledo ID7sx Weighscale Control panel, PN-2201-2, S/No2673729, which measure 360 x 200 x 250mm high. The total size of the Big Bag QC Check-Weighing System = 1.9 wide x 2.55m long x 0.7 high, and weighs approx 300Kgs.
Double Cone Dryer 3120Ltr
Pfaudler Balfour Blue Glass Lined 3120 Litre Jacketed Double Cone Drying System:Item 1, Pfaudler Balfour 316L Stainless Steel Blue Glass Lined 3120 Litre Jacketed Cone Blender, has a Nominal Working Capacity of 3120 Litres, and a Full Capacity of 4708 Litres. The Double Cone is 2.2M in Diameter, with a Central Straight side of 0.7m, is fitted at one end with a 600m Diameterhinged and clamped Manway, and at the other end with a fitted 300mm Diameter Actuated Butterfly Valve, which is used for the filling from above by means of the overhead Big Bag Filling system, and for discharging below via the Nitrogen pressurised / sealed Mobile Transfer Vessel Filling system. The Double Cone Blender is driven at a speed of 25 RPM, by means of the EX rated 415v 3 Phase 50 Hz 22Kw direct coupled motor and gearbox drive system. The Double Cone Blender measures 4.8 x 3.7 x 6.6m high with the cone raised vertically, and weighs approx 12 Tonnes. Item 2, Overhead Big Bag Loading system, consists of a 6m long x 1.5 SWL overhead beam mounted, electrically driven hoist, fitted with a 800Kg rated Big Bag Stainless Steel Liftnig Frame, which lifts the big bags of powder over the upright Double Cone Blender trolley mounted feed shute system, which has previously been pneumatically lowered over the opened inlet valve of the blender. The Operators control these operations from the surrounding overhead Stainless Steel Operator Platform Access Platforms. The Big Bag Loading System measures 4m x 4m x 2.8m high, and weighs approx 3 Tonnes. Item 3, Both the Loading & Unloading operations are dust extracted by means of 2 off Stainless Steel Trox Technik Dust Filtration units, mounted on 4 legs, which each measures 1.5 x 0.8 x 1.9m high, and weighs approx 300Kgs each. Item 4, The Double Cone Blender comes complete with 12 off Hickey, 500 Litre Capacity, mobile Transfer Vessels, BY-7821 A-L, which are each fitted with a 450mm Diameter Quick Release Lid, and a central Bottom outlet fitted with a manual discharge valve. The Transfer vessel are designed to operateat Atmospheric Presure at 100 Degrees C, and are each mounted on 4 off Swivel lockable castors. The Transfer Vessels each measure1m Diameter x Straight Side 0.7m, and measure externally 1m x 1.1m x 1.3m high, and weigh approx 100Kgs each. Item 5, Transfer Vessel Filling System, Wieghing System and Control Panels. The Transfer Vessel being filled is mounted on a guided floor mounted Mettler Toledo ID3sTx Weighscale, which measures 1.5m wide x 1.26m long x 90mm high, which is fitted with a front ramp. The total size = 1.5m wide x 2.06m long x 90mm high, and weighs approx 300Kgs. The Transfer Vessel Weigh Scale / Filling Operation is controlled by an adjacent 2001 Stainless Steel Mettler Toledo Control panel, S/N 2470609, which is linked to the adjacent support stand mounted Double Cone Dryer Stainless Steel Operator Control Panel, which measures 600 x 300 x 650mm high, and weighs 50Kgs.
Glass Lined Vessel
Pfaudler Balfour Glass Lined Vertical 7.57 m³ Lagged Tank. On the domed top of the 316L Stainless Steel vertical tank, TA-1501, is fitted 4 off 300mm Diameter ported inlets, and 3 off 150mm Diameter ported inlets, plus 2 off Lifting Lugs. The side of teh tank is fitted with an 800mm Diameter canyilever supported manway, clamped with 16 x M24 clamps. The domed base of the tank is fitted with a 100mm Diameter central valved outlet, 500mm high. The tank is supported on 4 bottom mounted blue painted Mild Steel support legs. This unjacketed Glass Lined vertical tank is lagged and Aluminium clad.
Listed in categories
- No related posts found
Add/update your company
Increase your company's profile, drive traffic to your website & boost your search engine ranking.Add your company Update an existing listing