article

The importance of critical quality attributes in Quality by Design for rapid bioprocess development strategies

Posted: 15 December 2017 | , | No comments yet

QbD and PAT could revolutionise the way biopharma industries operate by cutting down their attrition rates, which could drastically change their business model. This article considers the issues involved.

quality by design QbD

harmonise and modernise the product, process and regulatory aspects of pharmaceutical manufacturing. The QbD paradigm urges industries to incorporate the following principles into their own process:

  • Identify and have a better understanding of their product profile in terms of safety and efficacy
  • Identify physical, chemical or microbiological properties that can affect safety and efficacy, and thus should be controlled within a predetermined range
  • Design the process so as to deliver the required quality product consistently and control it by implementing a robust control strategy
  • Validate, document and continuously monitor the process to make sure the system/bioprocess performs robustly over the product life cycle.3,4
The importance of critical quality attributes in Quality by Design for rapid bioprocess development strategies

Figure 1: A schematic for Quality by Design in the biopharmaceutical industry.4 RA = risk assessment; PC = process characterisation

Recent studies reported that toxicity and lack of efficacy were the most important factors for high attrition rates in small molecule drug development.5 With nearly 80% of biological drugs failing in clinical development, mainly due to lack of efficacy and safety, smarter preclinical development using QbD-based approaches is urgently needed. This requires better product understanding, ie, examining characteristics that contribute to product quality, such as biological activity, affinity, pharmacology, toxicity, immunogenicity, etc, that can aid early prediction of success or failure. From a QbD point of view, this encompasses the principles of Quality Target Product Profile (QTPP) and Critical Quality Attributes (CQA). QTPP includes dosage form and strength, route of administration, intended use, release/delivery of therapeutic moiety, pharmacokinetics, and drug product criteria required for intended market (stability and purity). After the identification of QTPP, CQAs are then defined based on risk assessments. The rationale for identifying CQAs and relating them to product safety and efficacy arises from QTPP, prior product/process knowledge, literature, clinical data, non-clinical data including platform-based, in vivo as well as in vitro, assays, and relevant data from similar products. The main CQAs for biological drugs fall into the categories of size, charge, primary structure, post-translation modifications and higher order structure. For monoclonal antibodies, examples of product-related CQAs are fragmentation, aggregation, inadvertent glycosylation and conformation, whereas process-related CQAs are host cell proteins, formulation buffer components, and culture media residues, to name a few.6

QbD offers a plethora of advantages to the biopharmaceutical industry, as well as to regulatory agencies. It allows for easy implementation of innovative technologies, technical and scientific harmonisation of regulations, minimisation of manufacturing failures, reduction of attrition rates, as well as ensuring consistent production of high-quality products by continuously monitoring and updating bioprocesses. However, to exploit the full potential of QbD, many challenges must still be overcome, including filling terminology, training, fitting existing legacy products into the QbD frameworks, conflict of opinions among regulatory agencies across the world, and most importantly, a limited understanding of how CQAs impact the quality and efficacy of a product. A possible solution could be to increase the use of non-clinical studies as well as in silico tools to augment knowledge about the impact of CQAs on the clinical potency and safety of biological drugs.7 These rapid screening methods can be seamlessly integrated into a QbD approach when linked with the target product profile as well as critical quality attributes.

The BIORAPID approach

Expert panels consisting of members from industry and academia tried to address the above issues and underlined the crucial need to prepare academic education and training to expedite pharmaceutical process development as well as knowledge transfer pertaining to the latest advances in QbD and PAT. Although it resulted in highly successful training courses like M3C (measurement, modelling, monitoring and control), there still seemed to be a need for more in-depth training.8 Recognising the need to address the above challenges by implementing QbD and PAT as well as adequate training and knowledge transfer, BIORAPID – a European Union Horizon 2020 funded Marie Skłodowska-Curie Actions Innovative Training Network (MSCA ITN) – was formed to provide this training to early-stage researchers (ESRs). This enabled them to integrate directly into the European biopharmaceutical industry and implement state-of-the-art methods that uphold the QbD paradigm by providing a platform for rapid bioprocess development strategies for potential biopharmaceutical drug candidates (Figure 2). Though the framework was conceptualised with oncology-related proteins and recombinant proteins for diabetes treatment in mind, the resultant monitoring and modelling methods will be applicable to other biopharmaceutical process development. The four pillars of BIORAPID are rapid screening, modelling tools in bioprocess development, consistent development and scale-up, and real-time monitoring of bioprocesses. It also places specific emphasis on improving data quality, multivariate data analysis techniques, hybrid modelling, design of experiments, data augmentation, uncertainty and risk analysis, as well as workflow development, all of which are essential elements of the QbD toolbox.9 This is based on a strong academic and industrial foundation, with equal numbers of partners from industry and academia allowing for seamless knowledge transfer. What sets BIORAPID apart from other approaches is that it focuses on strategies that allow for rapid development of novel bioactive molecules from the very early stages of potency and efficacy testing to the biomanufacturing process characterisation and effective monitoring by hybrid modelling and multivariate approaches, which imparts a predictive nature to the platform.

The importance of critical quality attributes in Quality by Design for rapid bioprocess development strategies

Figure 2: The BIORAPID framework, spanning the entire bioprocess development pipeline

Implementation of QbD and PAT could revolutionise the way biopharma industries operate by cutting down their attrition rates, which could drastically change their business model and enable them to save time, money and resources. This could lead to reduction of prices for biologic drugs as well as more focus on medicines for rare diseases, thus proving beneficial to society.

Acknowledgments

The authors gratefully acknowledge the financial support from the EU-Horizon 2020 Marie Skłodowska-Curie Actions Innovative Training Network (MSCA ITN) project BIORAPID (no. 643056). The authors acknowledge the support and guidance from all the Biorapid ESRs, scientists in charge and all the BIORAPID partners involved (Acreo Swedish ICTAB, Alcyomics, Chr. Hansen AS, Danmarks Tekniske Universitet, Fujifi lm Diosynth Biotechnologies, Linköping Universitet, Newcastle University, Sanofi Aventis Deutschland GmbH and Technische Universität Berlin).

References

  1. EvaluatePharma (2017) World Preview (2017) Outlook to 2022. 10th edition.
  2. Blackstone E, Fuhr J. Biopharmaceuticals: the economic equation. Biotechnol Healthc. 2007;4(6):41-45.
  3. Rathore AS. (2009) Roadmap for implementation of quality by design (QbD) for biotechnology products. Trends in biotechnology. 2009;27(9):546-553.
  4. Rathore AS, Winkle H. Quality by design for biopharmaceuticals. Nature biotechnology. 2009; 27(1):26.
  5. Waring MJ, et al. An analysis of the attrition of drug candidates from four major pharmaceutical companies. Nat Rev Drug Discov. 2015;14(7):475-486.
  6. Group CMCBW. A-Mab: a case study in bioprocess development. 2009. Emeryville, CA: CASSS.
  7. Kizhedath A, Wilkinson S, Glassey J. Applicability of predictive toxicology methods for monoclonal antibody therapeutics: status quo and scope. Archives of Toxicology. 2016:1-18.
  8. Bracewell D, et al. Report and recommendation of a workshop on education and training for measurement, monitoring, modelling and control (M3C) in biochemical engineering. Biotechnology journal. 2010;5(4):359-367.
  9. Herwig C, Glassey J, Kockmann N, Gernaey K, Barolo M. Better by Design. The Chemical Engineer. 2017;41-43.

Biography

The importance of critical quality attributes in Quality by Design for rapid bioprocess development strategiesARATHI KIZHEDATH is a Marie Curie Early Stage Researcher in the EU H2020 MSCA ITN BIORAPID at Newcastle University. Her main interests are in rapid high-throughput screening techniques, predictive toxicology and QbD approaches in the biopharmaceutical industry. The main focus of her work is to study and develop a hybrid model to predict the safety of biological drugs as a part of a rapid bioprocess development strategies framework.

The importance of critical quality attributes in Quality by Design for rapid bioprocess development strategiesPROFESSOR JARKA GLASSEY is currently the Executive Vice President of the European Society of Biochemical Engineering Sciences (ESBES) and is based at Newcastle University. She is a biochemical engineer with expertise in Quality by Design, process analytical technologies and bioprocess modelling. The main emphasis of her research is on using advanced modelling techniques for (bio)process development for biologics and small molecules.

The rest of this article is restricted to logged-in members. Login or subscribe free to read the full article.


Send this to a friend